With this extra quality Bluetooth module you can enjoy your favorite music that can be played wirelessly from a mobile phone or another Bluetooth device via your original Mercedes-Benz Comand APS NTG 2, Audio 20, Audio 50 APS car radio with active AUX functionality. .
Product features:
- Stream music wirelessly (A2DP), also via Spotify and Deezer. Operation takes place via the smartphone itself
- High quality Bluetooth chip. Sound transmission without distortion according to High Definition Standard
- Current stabilizer with integrated interference filter for clear sound
- LED Power Status Indicator
- Shock and interference resistant
- No loss of quality or interference (as with FM transmitters) thanks to the direct connection
- Made entirely of copper wire (winter-resistant)
- Easy installation, without damage to the original parts of the car
- Only suitable for streaming music and NOT for calling!
Only the following car radios are supported:
- Audio 20, Audio 30, Audio 50 APS
- Comand APS (NTG2 only)
- W169 Mercedes A-Class
- W245 Mercedes B-Class
- W203 Mercedes C-Class
- W204 Mercedes C-Class with NTG4
- W209 Mercedes CLK-Class
- X164 Mercedes GL-Class
- W164 Mercedes M-Class
- W251 Mercedes R-Class
- W221 Mercedes S-Class
- R230 / W230 Mercedes SL-Class
- Mercedes CLE-Class (2004-2006)
Guaranteed NOT compatible with the following models: E-Class (W211), CLS-Class (W219), SLK-Class (R171).
Installation:
- Disassemble the original car radio
- Plug the white connector of this cable into the AUX port of the Quadlock connector ( see the 2nd image)
- After installation, switch the radio to AUX mode
- The black wire of the interface must be connected to earth (-12V), and the red wire to the switched (interrupted via ignition switch) +12V. Possibly to tap the radio wiring
- Note: AUX / CD changer must be enabled. If this is not the case, this must be arranged after installation by the dealer or a specialist with a diagnostic computer
Enabling AUX input:
COMAND APS: Press "AUDIO" button and select "AUX".
Audio20 / AUDIO50 APS: Press and hold the "CDC" button for 3 seconds.
Please check that the AUX port on your radio visually matches the connector on this Bluetooth interface before placing your order!
