AUX cable (3.5mm female to 12-pin) for MFD3, RCD 210, RCD 310, RCD 510, RNS 310, RNS 510 and RNS-E

If you currently do not have an AUX connection on your factory car radio, this is the solution.
This cable is connected to the AUX port of your original Audi / Seat / Skoda / Volkswagen car radio with active AUX functionality using the 12-pin connector.

If you can switch your car radio to the AUX input, then this cable can be used.
If this is not the case, the AUX functionality will not be activated by using this cable.
To do this, you can go to the dealer to have the AUX functionality activated (if supported by your car radio) or purchase a Yatour interface that does not require the active AUX functionality.

The AUX port is located on the back of the radio.
The following disassembly keys (2x sets) can be used to disassemble the radio:

https://www.carinterface.nl/radio-demontage-hulpstuks/radio-demontage-hulpstuk_yt-key02

The installation is quite simple. The white 12-pin connector of the AUX cable connects to the AUX port of the radio on the back of the radio.



This AUX cable is Plug & Play. Cable length approx. 130cm and can be expanded with a built-in / surface-mounted AUX connector with 1m cable .

Through the AUX input you can enjoy your favorite music on your MP3 player / phone / DVD / iPhone / iPod / Samsungs / HTC...
Please check that the AUX port on your radio visually matches the connector on this cable before placing your order!